The Gymleco Guided Seated Bust Rotation Machine is a machine specifically designed for oblique work. Its adjustable seat system with locking pin allows you to switch from one side to the other very quickly and to train without having to get off the machine to adjust it.
The seat and the forearm wedges/holding handles guarantee stability during the execution of the movement.
- Guided load
Features of the Gymleco Guided Seated Bust Rotation Machine:
Maximum load capacity: 60 kg
Rotating seat adjustable with locking pin
Backrest and fixed wedges
Pair of non-slip handgrips
Non-slip mounting pads
Operating instructions on the frame of the machine
- Upholstery colour available
- Length (cm)
- Width (cm)
- Height (cm)
- 155.00 kg
error Your review appreciation cannot be sent
feedback Report comment
check_circle Report sent
error Your report cannot be sent
Write your review
check_circle Review sent
error Your review cannot be sent
The Gymleco Vertical Pull-up is a guided load machine designed to work the back muscles, specifically the lats and the teres major muscle. Its design with the handle attachment at chest level promotes optimal muscle recruitment thanks to an ideal starting position.
Its height adjustable wedges and band pull mechanism will ensure stability and fluidity during the entire movement.
The Gymleco Rehab Vertical Pull-Up is a variation of the standard Vertical Pull adapted for back work by people in wheelchairs or with limited mobility. Its design is similar to that of its counterpart, but incorporates a removable seat to allow wheelchair access to the machine, and a chain system that allows the handle to be grasped in a low position.
It is a very versatile device ideal for physio centres and other rehabilitation professionals.
The Gymleco Vertical and Horizontal Pull-up Combo is a 2-in-1 guided load machine for making high and horizontal pull-ups on the same support. Thanks to an offset weight shaft and a folding/unfolding seat, it is possible to change the layout in the blink of an eye. The position of the handle attachments follows the same principles as on the independent machines, with attachments ideally placed to maximise the recruitment of the muscles involved.
It is a versatile and relatively compact machine that maximises space in small environments while offering great work perspectives.
The Gymleco 4-Station Tower is a guided multi-function station combining a vertical pull-up, horizontal pull-up, adjustable pulley and biceps/triceps station. Each of these machines has its own weight stack, making it possible to use all 4 stations simultaneously.
Its very compact composition and its consequent weight shafts (60 to 100 kg per station) make this product ideal for small training spaces or to isolate all pulley exercises in the same place.
The Gymleco's 8-StationTower with cross cables combo is an ultra-complete station combining two Gymleco 4-station towers linked together by a facing pulley system. All stations can be used simultaneously thanks to weight stacks specific to each station.
Its comprehensive design and wide range of available stations make it an essential for any serious training space such as fitness centres or commercial rooms.
2 vertical pull handles
2 horizontal rowing handles
2 biceps/triceps positions
2 height adjustable pulleys (cross cables)
The Gymleco 4-Station Tower with cross cables combo is a complete station combining a 4-station tower and a facing pulley system. All stations can be used simultaneously thanks to weight stacks specific to each station.
Its compact design allows you to centralise all of your pulley equipment in one place for considerable space savings and clarity in the layout of your workout space.
1 vertical pull handle
1 horizontal rowing handle
1 biceps/triceps station
2 height adjustable pulleys (cross cables)
The Gymleco Cross-Cable Pulley is a height-adjustable pulley system with independent weight shafts that allow targeted work of all upper body muscles. The low position of the weight plates allows for a wider range of motion, while the banded lever system provides smoothness during exercise and prevents jerking.
A compact and indispensable piece of equipment in any training space.
The Gymleco Adjustable Pulley is a height adjustable pulley system with a weight shaft in the lower position to target all upper muscle groups.The banded lever system provides smoothness during exercise and prevents jerking, while the 8 levels of adjustment will offer many training perspectives.
A very compact machine that is ideal to complete a 4-station tower or alone if the need for a cross cable system is not required.
The Gymleco Adjustable Double Pulley is an adjustable cross cable pulley system with 30° oriented shafts joined by a tall frame offering multiple pull-up handles. The orientation of the weight shafts saves a lot of space and makes it possible to place the equipment in a corner. It is an ideal choice for providing a face-to-face training system in a small training space.
The unit is also equipped with several hooks for storing handles, straps and other accessories.
The Gymleco Triceps Pulley is a guided load machine developed to provide a means to effectively isolate the triceps on pulley extension movements. The addition of a backrest on the frame of the machine provides better stability during the effort, and limits the phenomena of "cheating" where the tension can be shifted to adjacent muscle groups.
A steel loop is also present at the base of the machine to allow the attachment of resistance bands or other accessories that can reinforce the user's stability during exercise.
The Gymleco Biceps / Triceps Pulley is a guided load 2-in-1 machine combining a curl platform for the biceps with a rope extension station for the triceps. The seat and the platform are height- and incline-adjustable allowing you to change quickly from one exercise to another and to adapt to all sizes.
The weight stack is designed to offer large maximum loads (60 kg), but the first 6 plates are 2.5 kg each to make it possible to perform isolated work using light weights.
The Gymleco Smith Machine is a guided load machine offering a reinforced frame and rails matched with a specially designed bar to prevent mechanism instability during exercise. The pair of adjustable spotter arms welded to the frame offers a high degree of safety, while the bottom crossbar can be removed to allow more room for prone/inclined movements.
A very versatile machine ideal for completing free-weight structures.
The Gymleco Smith Machine with counterweights is an improved version of the original Smith Machine equipped with counterweights parallel to the rail.Their presence lightens the bar's unladen weight and improves the fluidity of the movement, making the machine suitable for rehabilitation or beginners.
The pair of adjustable spotter arms welded to the frame offers a high degree of safety, while the bottom crossbar can be removed to allow more room for prone/inclined movements.
A very versatile machine ideal for completing free-weight structures.
The Gymleco Multi-Smith-Machine is a guided load machine inspired by the Smith Machine with counterweights with a double rail allowing for vertical and horizontal bar movement.
Designed like a Power Rack, it is an extremely versatile machine with a double bar rest with 9 levels of adjustments, offering a wide variety of training possibilities such as squats, press-ups, or rowing.
This is the most advanced guided rail in the Gymleco range, ideal for efficiently completing free-weight training areas.
Related Products By Brand
The Gymleco Unilateral High Dorsy is a plate load machine that allows for direct targeting of the lats. Its design with independent arms gives it a great added value by enabling one-sided work, which differentiates it from the traditional pulling machines. It has a large load capacity and can be used for work with large loads.
The Gymleco Unilateral Low Horizontal Pull is a plate load machine specifically targeting the middle and upper back. Its design with independent arms enables one-sided work, and its great load capacity gives it excellent versatility with the option of working with heavy or light loads.
The Gymleco Unilateral High Rower is a plate load machine enabling an extensive range of motion including the full rotation of the scapulae allowing you to work of the majority of the back muscles. Its design with independent arms enables one-sided work, and its large load capacity allows the use of heavy/very heavy loads.
The Gymleco Recumbent Bench Press is a converging plate load machine designed to work the entire pectoral muscles. It incorporates a start-assist pedal at the footrest to make it easier to initiate movement at the start of exercise. High load capacity and suitable for all types of users.
The Gymleco Unilateral Recumbent Elongated Bench Press is a plate load machine designed to provide a guided alternative to the bench press. Its independent arms enable one-sided movements, and the significant length of the bench enables perfect positioning for any type of user. High load capacity.
The Gymleco Unilateral Inclined Pec Deck is a plate load machine designed to offer an alternative to dumbbell inclined splits and pulley splits. Its height-adjustable seat and tilting backrest allow you to work your pectoral muscles at different angles. In addition, its independent arms make enable one-sided work.
The Gymleco Standing Bench Press is a highly modular plate load machine designed to provide a standing alternative to the bench press. Its two platforms and 7 handle anchorages give it great versatility and optimal freedom of movement for all types of users.
The machine has 10 possible holds (neutral/pronation/supination) to vary the recruitment of the pectoral fibres.
The Gymleco Unilateral Shoulder Press is a plate load machine targeting the shoulders and primarily the frontal and lateral bundle. Its design with independent arms allows for one-sided work, while its adjustable seat and large load capacity make this machine suitable for all types of users.
The Gymleco Seated Lateral Lift is a plate load device designed to isolate the lateral shoulder bundle. The long arm start and integrated forearm wedges allow for smoother movement while limiting the strain on the forearm and elbow. Its design with independent arms also allows for one-sided work.
The Gymleco Unilateral Upright Rower is a plate load machine targeting the trapezius, posterior deltoids and neck. Its split-arm design allows for one-sided work, while its large load capacity makes it possible to handle heavy loads. Ideal for performing very heavy shrugs or guided rowing variations.
The Gymleco Free-Weight Seated Leg Curl is a machine designed to target the hamstrings with limited interference from other large leg muscles. Thanks to its depth-adjustable backrest and its side handles, it is a versatile machine offering a wide range of motion.
The Gymleco Unilateral Standing Leg Curl is a plate load machine designed to isolate the hamstrings, either simultaneously or independently. The very large range of motion available allows a complete stretching of the muscle and a maximum recruitment of the fibres.
The position of the leg as well as the hand grips make it very difficult to "cheat" on the movement, making it very effective for targeting the hamstrings as a whole.